|
|
From left to right : * The left one is connected to the input of the DC shifter/amplifier, not anymore as output for headphones. That output is moved to the place of the pushbutton next to the joystick (H). That button is moved to the ES area. * The four seperate outputs, having both the AC and DC lines of output channels 1 and 2, are reduced to two outputs. The AC or DC can be chosen with a switch. * The two spare connectors have a direct output from Envelope Shaper and Ring Modulator. In my case. * Under these ES - RM outputs the external inputs for osc. sync (A) and osc. phase (B) modulation. * At the right the same : Four connectors with 2 line and 2 microphone going to the 2 input channels, reduced to two. I skipped the microphone option. Decided to use external mic. preamps to get a line signal. * 3-way Switches to prevent a possible signals conflict at input channels 1 and 2 when also the KS is connected. * The two spare inputs '3' and '4' are directly connected to patchboard lines 1 and 2. The original output channel signals at these lines were removed. There are other ways to get feedback. |
