FastTracker XM - Edit Codes --------------------------------- Codes in 'volume'-column - max value : a - Fine volume up - 15 b - Fine volume down - 15 c - Volume slide up - 15 d - Volume slide down - 15 g - Tone portamento - 15 h - Vibrato depth - 15 l - Pan slide left - 15 p - Set panning - 64 r - Pan slide right - 15 u - Vibrato speed - 15 (v) - Set volume - 64 --==---==--==--==--==--==--==--==--==--==--==--==--==--==--==-- Codes in 'effect'-column - all values 00 - FF : 0 - Arpeggio - Syntax: 0 + 1st halftone + 2nd halftone 1 - Portamento Up - Syntax: 1 + speed 2 - Portamento down - Syntax: 2 + speed 3 - Tone portamento - Syntax: 3 + Speed to bend the sample 4 - Vibrato - Syntax: 4 + Rate + Depth - vibrato control (E4) can be used to change the vibrato waveform 5 - Volslide plus Toneporta - Syntax: 5 + Speed - The speed is used for the volume slide 6 - Volslide plus Vibrato - Syntax: 6 + Speed - The speed is used for the volume slide 7 - Tremolo - Syntax: 7 + Rate + Depth 8 - Set panning - Syntax: 8 + Panning Position - 00=left, FF=right, 000 -> Resets the panning position to defined in the instrument editor 9 - Set offset - Syntax: 9 + Sample offset - 908 -> Starts playing the sample 2kb later if the smp is 8-bit. - 9FF -> Nothing! A - Volume slide - Syntax: A + Slide speed up + 0 of : Syntax: A + 0 + Slide speed down B - Position jump - Syntax: B + Songposition - to the specified song position and play the pattern from the beginning C - Set volume - Syntax C + Volume D - Pattern break - Syntax: D + Pattern position - D16 -> Breaks the pattern and starts then next pattern at position $16 F - Set tempo - Syntax: F + speed / tempo - Sets speed between $1 and $1F. $20 -> $FF sets the tempo (BPM). Correct BPM at speed 06. G - Set global volume - Syntax: G + volume - Sets the global volume. The volume should not be greater than $40 H - Global volume slide - Syntax: H + Up speed + Down speed - Works exactly as volume slide, but it slides the global volume instead. K - Key off - L - Envelope position - Syntax: L + Position - Changes the envelope position P - Panning slide - Syntax: P + Right speed + left speed - Slides the panning position. It works like the volume slide. T - Tremor - Syntax: T + On time + Off time - Will set volume to zero during off time number of ticks. Included for STM compatibility. Y - Panbrello - Z - Midi macro - R - Multi Retrigger - Syntax: R + Interval + Volume change - This is an extended version of the retrig command. Volume change: 0 = None 8 = Unused 1 = -1 9 = +1 2 = -2 A = +2 3 = -4 B = +4 4 = -8 C = +8 5 = -16 D = +16 6 = *2/3 E = *3/2 7 = *1/2 F = *2 +++++++++++++++++++++++++++++++++++++ All values 0 - F : E1 - Fine porta up - Syntax: E1 + Speed - works as portamento up/down, but is only slides up once. E2 - Fine porta down - Syntax: E2 + Speed - works as portamento up/down, but is only slides up once. E3 - Glissando control - Syntax: E3 + Status - If Status =1, the freq., using tone portamento, will be rounded to nearest halftone E4 - Vibrato waveform - Syntax: E4 + Type - 0 = Sine, 1 = Ramp down, 2 = Square E5 - Set fine tune - Syntax: E5 + Tune - Should be used together with a note. It will cause another fine-tune value to be used. E6 - Pattern loop - Syntax: E6 + Count - If count is zero, the loop-beginning will be specified. Non-zero : pattern looped from loop start E7 - Tremolo waveform - Syntax: E7 + Type - Works exactly as set vibrato control E8 - Set panning - E9 - Retrigger note - Syntax: E9 + Interval - Retriggs the note with the specified interval. EA - Fine volslide up - Syntax: EA + Speed - Works as the usual volume slide, but it will only slide once. EB - Fine volslide down - Syntax: EB + Speed - id. EC - Note cut - Syntax: EC + Tick - Cuts note at specified tick. It will only set the volume to zero, the sample will still be played. ED - Note delay - Syntax: ED + Ticks - This command will delay the note the selected number of ticks. EE - Pattern delay - Syntax: EE + Notes - Will delay the pattern the selected number of notes. EF - Set active macro - X1 - Extra fine porta up - Syntax: X1 + Speed - Works as fine portamento up/down, but the speed will be divided by four. X2 - Extra fine porta down - Syntax: X2 + Speed - id. X5 - Panbrello waveform - X6 - Fine pattern delay - XA - Set high offset - +++++++++++++++++++ X9n - Sound control : X90 - Surround off X91 - Surround on (Set L/R 50 % - R 180 degrees) X9F - Reverse sample ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Made by Sam Shuy Zen - Thanks to Triton for FT2.doc - update sep 18 2004